|Configuration of DX-Telnet for VQLog|
With VQLog you can receive DX-Spots from several sources. WEB-Cluster, DX-Cluster, Packet cluster, etc) and additionally filter only those meaning a new (or not confirmed) DXCC or locator for you.
Reception of DX-Spots is made through the excellent program DXTelnet by Fabrizio Sartoni, that must be running simultaneously in the PC. Spots received by DXTelnet (DX-plorer) are sent to VQLog via DDE for their processing. (Alternatively you can also use LiveMuf for DX-Spot reception).
NOTICE: Version 3.1 build 203 of VQLog implements the direct connection to DX-Cluster, so the use of DX-Telnet or Livemuf is no longer required to get the spots.
Click here for information on how to get DXSubmmit spots via packet radio using DXTelnet
IMPORTANT: The connection between VQLog and DXTelnet will only work with the registered version of DXTelnet 4.8 or later
Configuring DXTelnet 32 bit (versions 5.4 and later) for communicating with VQLog.
Configuring DXTelnet 16 bit (versions 4.8 to 5.2) for communicating with VQLog.